Architecture, Engineering & Planning EVstudio | Denver & Evergreen Architect | Colorado & Central Texas | Blog

Laminated Veneer Lumber (LVL) is a manufactured structural wood product that is utilized when the strength requirements of a timber beam exceed that of your typical sawn lumber beam. LVLs are produced by taking wafer thin slices of wood and sandwiching them together (see photo below). Each slice of wood is oriented with the grain perpendicular to the slice next to it. The “sandwich” is then held together with a high strength epoxy. The result is a timber framing member that is not only superior in strength, but can be purchased in lengths of up to sixty feet while staying straight as an arrow. Finding a 2x8 longer than ten feet long at your local lumber yard that isn’t warped would be a difficult task.

Laminated Veneer Lumber

In any construction project, especially new additions to homes or commercial buildings, there is a limited amount of space to run utilities such as electrical wires or water pipes. Sometimes the only available option is to port these utilities through the beam. As with all timber construction, a square hole should never be cut into an LVL beam. Square cuts develop stress concentrations and are prone to splitting. Round (drilled) holes are preferred because they allow stresses to develop “more smoothly” around the opening. As a beam is loaded, stresses concentrate in different areas. Knowing this, the APA (The Engineered Wood Association) has created the illustration shown below as a field guide to the most desirable places drill holes in LVL beams. Please keep in mind that it is always safer to consult your licensed structural engineer when modifying any load bearing member.

From the APA document "EWS G535A"

The EWS G535A is a free publication from the APA which goes into much greater detail than presented here. The APA’s website is a great resource for builders, engineers, architects and home owners who are looking for information on manufactured lumber products.

Originally posted 2010-07-02 00:01:07.

1. Notching of Laminated Veneer Lumber (LVL) Beams
2. Lumber Sales Continue to Rise in 2010
3. 2010 Lumber Costs Soaring in First Quarter
4. Lose Weight Today! Ask Me How. – Steel Beams
5. Fastening to Concrete – Wedge Style Expansion Anchors
6. 2010 Lumber Trends Relax Somewhat in Second and Third Quarters
7. EVstudio Designing a Replacement for a Fire Damaged Home
8. Clearance of Steel Beams in a Crawlspace